RUTHLESS Water Jetting - Environmentally Friendly Surface Preparation

· 2 min read
RUTHLESS Water Jetting - Environmentally Friendly Surface Preparation


Cleaning a surface, whether porous or not, is really a primary step before repainting or recovering an object. Ruthless water jetting for surface preparation is really a clean, economical solution to prepare any surface. It is a type of hydro-cleaning - this means shooting water at a higher pressure and concentrating its direction at the surface to be cleaned.

Loose particles, dust, and contaminants must be removed first otherwise it will greatly impact the brand new application negatively. The new coating either won't adhere at all or it will have a short lifespan by easily peeling, chipping or wearing off a lot more quickly than normal. All of this can be prevented by taking a couple of minutes before the application.

Rather than sand-blasting or using chemical solvents, high pressure water jets utilizing the appropriate equipment for the right level of force is a professional favourite of several to avoid unnecessary dust and wreck havoc on liquid strippers. It is also a safer way for the worker who gets the task of removing the old surface. Chemicals require more safety precautions and will pose health threats. Some sand-blasting material may also be very environmentally unfriendly.

Using water forced through jets can remove old paint or other sealants from concrete to metals. The quantity of pressure used can go as high as 2,800 bars and even higher, with regards to the job. Commercial use can go even higher, up to 3,800 bars, to create ultra-high pressure water jetting.

Necessary equipment for high pressure water jetting for surface preparation ranges from tool-sized for use by a worker to machinery meant to perform the work with out a human guiding it. It really is an accepted way to prepare surfaces worldwide.

For surfaces which are porous, high pressure water jetting may be the preferred way to remove old coatings. The reason being the water jets can reach inside and clean out the old material and contaminants which are inside the microscopic pores without harming the top itself. No damage is performed that may easily happen with an excessive amount of pressure from wire stripping or sand-blasting. Chemical solvents may also be harder to gauge in regards to what strength and time they might should be applied.

Asphalt is another surface that ruthless water jetting is often used to get ready. For airport runways, how much friction that comes into contact between an aeroplane and the asphalt surface is vital. If there is too much tire rubber build-up on the surface, it becomes less resistant and more slippery, especially when wet.  Commercial Sewer Jetting  causes aeroplanes to require more distance to take off and land.

There are plenty of parts to a high pressure water jet for surface preparation. This consists of a pump, valves, jets and a spray-bar, all that can come in a variety of sizes for easy and tough alike. Some are rotary powered plus some use hydraulic power.

Overall, for environmentally safe and powerful removal of unwanted coatings from tar to paint along with other adherents, high pressure water jetting for surface preparation is the hydro-cleaning removal system chosen by professionals all over the world.